Hyperetta
Automatic film scrap granulators
Film granulators with little thermal degradation
Since the residence time in the cylinder is extremely short, 3 to 4 seconds, and the processing temperature is low, there is almost no thermal deterioration of resins and additives, and the mixing ratio with new raw materials increases.
The heater capacity is small because the L / D is 7 to 12, even if it is made into a semi-gel by frictional heat and granulated, or even if it is a forced heating type, the whole is designed to be an energy-saving type.
Trimmed ears, defective raw materials, etc. can be directly added in succession, and the high specific gravity becomes grains of around 0.3 to 0.4, so mixing with new raw materials is easy.
Model name | HP-60 |
---|---|
Motor | 7.5/11kW |
Unit dimensions | 715mm(W) 1,350mm(L) 1,280mm(H) |
Unit weight | 500kg |
Model name | HP-90 |
---|---|
Motor | 18.5/22kW |
Unit dimensions | 965mm(W) 1,650mm(L) 1,580mm(H) |
Unit weight | 1,150kg |
Model name | HP-120 |
---|---|
Motor | 22/37/45kW |
Unit dimensions | 965mm(W) 2,000mm(L) 1,650mm(H) |
Unit weight | 1,400kg |